SM-11 INOX (SIAT) case sealer
Equipment Description
Automatic case sealer with side driving belts and manual adjustment of the box size is designed for gluing boxes with adhesive tape. Two strips of tape are applied simultaneously to the top and bottom flaps of the box.
The box coming from the conveyor belt is grabbed by the side drive belts and transferred to the upper flaps folding area. Then the upper and lower flaps are sealed. All this happens automatically, with no operator.
The machine is supplied with a standard electrical system and is not designed to operate in a gas environment, where there is a risk of fire. For such cases, the machine must be equipped with fire-fighting modules and/or pneumatic motors.
Gallery
Equipment Characteristics
| Material | Stainless steel |
| Average output capacity, boxes per hour | 600 (max up to 1200) |
| Box length (min-max) (mm) | 200-600 |
| Box width (min-max) (mm) | 150-500 |
| Box height (min-max) (mm) | 120-600 |
| Sealing | верх и низ короба |
| Adhesive tape width (mm) | 75 |
| Adhesive tape hub diameter (mm) | 76 |
| Outer diameter of tape reel (mm) | 410 (length 990 m) |
| Total power | 0,36 kW, 380V, 3 phases |
| Air pressure (bar) | 6 |
| Air consumption (L/cycle) | 3 |
| Overall dimensions (standard), length (mm) | 2215 |
| Overall dimensions (standard), width (mm) | 940 |
| Overall dimensions (standard), height (mm) | 1600-1850 |
| Working surface height (mm) | 500-750 |
| Manufacturer | SIAT (Italy) |